T+A R 1000 E, User Manual

Page: 18 / 68

18
Tone control settings
(Tone menu)
The R 1000 E features a range of facilities for fine-tuning the sound to suit your personal preference, the listening
environment and the particular recording currently being played. All the tone control settings are grouped in the TONE
menu.
Briefly press the

button on the remote control handset to call up the
balance and tone control functions. This action brings up a set-up window which
displays the various adjustment options.

Use the

/

buttons to select an adjustment option.

The option displayed can now be changed using the

/

buttons.
If no action is taken for a period of a few seconds, the set-up window
disappears from the screen.
Balance
This menu item is used to alter the balance in level between the left and right
channels, e.g. to compensate for non-symmetrical loudspeaker positioning.

The balance can be adjusted in increments of 1,5 dB; the screen always
displays the current value.
The primary purpose of the Balance setting in the Tone menu is to compensate
for inadequacies in the audio mix of the recording currently being played.
Loudness

The R 1000 E is equipped with an automatic level-dependent volume control
system ( LOUDNESS ), designed to compensate for the frequency-dependent
sensitivity of the ear at very low volume, caused by the physiology of the human
auditory system.
This set-up option switches the level-dependent volume control on and off.
Tone Control This menu point can be used to disable (by-pass) the R 1000 E`s tone controls.
To switch off the tone controls, select the “OFF” setting. When the tone controls
are switched off, any adjustments you make to the following menu points
“BASS” and “TREBLE” have no effect.