Basic settings
42
Inputs Menu
Four
AV source devices
(providing picture and ana-
logue sound signals) can be connected to the DVD sur-
round receiver; alternative input sockets can be assigned
to these source devices on the
K6
; these inputs (co-axial
or optical) are suitable for digital signals.
If the
K6
is set up in this way the signal from the digital
source device is accepted and processed instead of the
analogue stereo input signal.
The alternative inputs are assigned in the
'
Inputs Menu
'
.
Digital inputs
The on-screen menu lists the digital inputs of the
K6
on
the left -
DIG opt.
and
DIG coax
.
Each digital input can be assigned to one of the fol-
lowing AV inputs:
--- TV VCR/TVB STB AUX-AV
---
no assignment
STB
set-top box
Calibration:
When an external source device providing an analogue
sound signal is connected to the
K6
, the best possible
reproduction quality can only be obtained if the ana-
logue / digital converter of the
K6
is matched accurately
to the output level of the source device.
The
K6
features an automatic calibration function to
carry out this process. This is the calibration procedure:
1.
Select the desired analogue
audio or AV source
device
and play a fortissimo (extremely loud) pas-
sage of music.
2.
Call up the
'
Inputs Menu
'
, move to
Calibration
start
and press the
button.
3.
The screen displays the
active
message as long as
the calibration process continues.
Notes
The automatic calibration function can be used for
all
external analogue audio and AV source devices
(TAPE 1,
AUX 1,
AUX 2 / PHONO,
STB,
TV,
VCR / TVB
and
AUX / AV),
provided that you have not
assigned a digital input to that socket. We recommend
that you carry out the procedure for all devices con-
nected to these inputs.
The integral tuner is already calibrated correctly; the
K6
therefore does not allow you to calibrate this source
device.
If, in spite of calibration, a source device shows signs
of overloading (distortion), you will see the following
message displayed briefly on the integral screen:
'
O V E R L O A D
O V E R L O A D
O V E R L O A D
O V E R L O A D
'.
If this happens, the analogue/digital converter needs to
be re-calibrated to suit the source device in question.
