T+A HV Series, User Manual

Page: 54 / 78

54
Service, Damage The case should only be opened by a qualified specialist technician. Repairs
and fuse replace
workshop. With the exception of the connections and measures described in
these instructions, no work of any kind may be carried out on the device by
unqualified persons.
If the unit is damaged, or if you suspect that it is not functioning correctly,
immediately disconnect the mains plug at the wall socket, and ask an
Over voltage The unit may be damaged by excess voltage in the power supply, the mains
circuit or in aerial systems, as may occur during thunderstorms (lightning
strikes) or due to static discharges.
Special power supply units and excess voltage protectors such as the

'Power Bar' mains distribution panel offer some degree of protection from
damage to equipment due to the hazards described above.
However, if you require absolute security from damage due to excess
voltage, the only solution is to disconnect the unit from the mains power
supply and any aerial systems.
To avoid the risk of damage by overvoltages we recommend to disconnect all
cables from this device and your HiFi system during thunderstorms.
All mains power supply and aerial systems to which the unit is connected
must meet all applicable safety regulations and must be installed by an
approved electrical installer.
Approved usage

The device is designed to operate in a temperate climate and altitudes up to
2000 m above sea level. The range of permissible operating temperatures is
+10 … +35°C. This device is designed exclusively for reproducing sound
and/or pictures in the domestic environment. It is to be used in a dry indoor
room which meets all the recommendations stated in these instructions.
Where the equipment is to be used for other purposes, especially in the
medical field or any field in which safety is an issue, it is essential to
establish the unit’s suitability for this purpose with the manufacturer, and to
obtain prior written approval for this usage.
Approval and conformity
with EC directives In its original condition the unit meets all currently valid European
regulations. It is approved for use as stipulated within the EC.
By attaching the CE symbol to the unit

declares its conformity the EC
directives and the national laws based on those directives. The declaration
of conformity can be downloaded from
www.ta-hifi.com/DoC .
The original, unaltered factory serial number must be present on the outside
of the unit and must be clearly legible! The serial number is a constituent
part of our conformity declaration and therefore of the approval for
operation of the
documentation supplied with it (in particular the inspection and guarantee
certificates), must not be removed or modified, and must correspond.
nformity and approval, and
the unit may not be operated within the EC. Improper use of the equipment
makes the user liable to penalty under current EC and national laws.
Any modifications or repairs to the unit, or any other intervention by a
workshop or o
and operational permit for the equipment.
devices which are themselves approved and fulfil all currently valid legal
requirements.
When used in conjunction with auxiliary devices or as part of a system this
unit may only be used for the purposes stated in the section
' Approved
usage ' .
Disposing of this product

The only permissible method of disposing of this product is to take it to your
local collection centre for electrical waste.