T+A CARUSO BLU, User Manual

Page: 70 / 78

70
Dropouts occur during
playback.
Cause 1:
The distance to the

is too great (>6 metres), or there are obstacles
between the  and the mobile device which affect reception.
Remedy:
Reduce the distance to the  , and avoid obstacles - such as persons -
between the devices.
Cause 2:
The radio connection is suffering interference from other radio networks (e.g.
WLAN, baby intercom, etc.) which may already be in use.
Remedy:
If possible, switch to the USB input or the Streaming Client.
Streaming Client
The streaming client can
not connect to a network.
On the display the indication
'SCL Connecting...'
is displayed.
Cause 1 (cable LAN):
Network cable not properly connected
Remedy:
Connect network cable, check connection to router
Cause 2 (cable LAN):
The router uses energy-saving functions, causing it to switch the LAN port on
with a delay, with the result that the
 makes no connection - or only a
sporadic connection - during the power-on process.
Remedy:
In the menu for the SCL source (hold the SRC button pressed in) change the
"Network IF mode" menu point to "
Lan only ". This ensures that only the wired
network connection is used.
Cause 3 (wireless LAN):
WLAN antenna not connected or placed in a location with bad reception quality
Remedy:
Connect WLAN antenna properly and find a location with good reception
quality.
Set the transmission power output of your WLAN router to maximum.
Try to establish a network connection first in a location close to the WLAN
router. If this succeeded try to connect to WLAN from a more remote location.
Experiment with antenna position and try to find a location with better reception
quality.
Cause 4 (wireless LAN):
WLAN reception quality bad (low field strength). Possibly too much attenuated
by walls/ceilings on the transmission path.
Remedy:
Optimize location of receiver and transmitter antennas.
Alternative:
If transmission probl
ems persist a so called ‚Power Line' network might be good
alternative to establish a good and stable network connection.
The best, safest and most secure network however will always be a cable LAN
network.
Cause 5 (wireless LAN):
Although the router has been selected, and the WLAN password has been
entered correctly, no connection to the network is created.
Remedy:
Some routers are set by default to two simultaneous WLAN protocols
(WPA / WPA2). Set your WLAN router to just one type of protocol, e.g. WPA2.
Cause 6:
Network parameters not properly configured.
Remedy:
Configure the network parameters correctly (see chapter 'Network
configuration' ).
Cause 7 (operation without network connection):
For proper operation the  needs at least one properly connected
network device. This can be a LAN or WLAN network or a USB storage device.
Remedy:
If the  shall be operated without network (LAN / WLAN) please connect
at least a USB stick.