background image

 

30 

Safety notes 

 
 

 

For  your  own  safety  please  consider  it  essential  to  read  these  operating 
instructions right through, and observe in particular the notes regarding setting 
up, operation and safety. 

 

 

 

Installation 

 

Please consider the weight of the device. Never place the device on an 
unstable surface; the machine could fall off, causing serious or even fatal 
injury. Many injuries, especially to children, can be avoided if the following 
simple safety precautions are observed: 

  Use only such items of furniture which can safely bear the weight of the 

device. 

  Ensure that the device does not project beyond the edges of the supporting 

furniture. 

   Do not place the device on tall furniture (e.g. bookshelves) without securely 

anchoring both items, i.e. furniture and device. 

  Explain to children the hazards involved in climbing on furniture to reach the 

device or its controls. 

When installing the unit on a shelf or in a cupboard it is essential to provide an 
adequate  flow  of  cooling  air,  to  ensure  that  the  heat  produced  by  the  unit  is 
dissipated  effectively.  Any  heat  build-up  will  shorten  the  life  of  the  unit  and 
could be a source of danger. Be sure to leave free space of 10 cm around the 
unit for ventilation. 
If the system components are to be stacked then the amplifier must be the top 
unit. Do not place any object on the top cover. 

The  unit  must  be  set  up  in  such  a  way  that  none  of  the  connections  can  be 
touched  directly  (especially  by  children).  Be  sure  to  observe  the  notes  and 
information in the section 

'Installation and Wiring'

. 

 

 

 

Connection 

 

The terminals (marked with the 

-symbol) can carry high voltages. 

Always avoid touching terminals and sockets and the conductors of cables 
connected to them. Unless ready-made cables are used, all cables connected 
to these terminals and sockets must always be deployed by a trained person. 

 

 

 

Power supply 

 

The  device  is  intended  to  be  connected  to  mains  outlet  with  protective  earth 
connector.  Please  connect  it  only  with  the  mains  cable  supplied  to  a  properly 
installed mains outlet with protective earth connector.  
The  power  supply  required  for  this  unit  is  printed  on  the  mains  supply  socket. 
The  unit  must  never  be  connected  to  a  power  supply  which  does  not  meet 
these specifications. If the unit is not to be used for a long period disconnect it 
from the mains supply at the wall socket. 

 

 

 

Mains leads / Mains plug 

 

Mains leads must be deployed in such a way that there is no danger of damage 
to  them  (e. g.  through  persons  treading  on  them  or  from  furniture).  Take 
particular care with plugs, distribution panels and connections at the device. 

Unplugging the mains plug will disconnect the device from the mains for service 
and repair. Please make sure that the mains plug is easily accessible. 

 

 

 

Enclosure openings 

 

Liquid  or  particles  must  never  be  allowed  to  get  inside  the  unit  through  the 
ventilation slots. Mains voltage is present inside the unit, and any electric shock 
could  cause  serious  injury  or  death.  Never  exert  undue  force  on  mains 
connectors. 
Protect  the  unit from drips and splashes of water; never place flower vases or 
fluid containers on the unit. 
Do not place naked flame sources, such as candle lights on the device. 

 

 

 

Supervision of device 
operation 

 

Like  any  other  electrical  appliance  this  device  should  never  be  used  without 
proper  supervision.  Take  care  to  keep  the  unit  out  of  the  reach  of  small 
children. 

 

 

 

Service, Damage 

 

The  case  should  only  be  opened  by  a  qualified  specialist  technician.  Repairs 
and  fuse  replacements  should  be  entrusted  to  an  authorised 

  specialist 

workshop.  With  the  exception  of  the  connections  and  measures  described  in 
these  instructions,  no  work  of  any  kind  may  be  carried  out  on  the  device  by 
unqualified persons. 

If  the  unit  is  damaged,  or  if  you  suspect  that  it  is  not  functioning  correctly, 
immediately  disconnect  the  mains  plug  at  the  wall  socket,  and  ask  an 
authorised 

 specialist workshop to check it. 

Summary of Contents for Cala D

















































Reviews: