T+A CALA CDR, User Manual, Page: 57 / 72

57
Operating the
menu,
changing and
storing
IP addresses Use the

/

buttons in the menu to select the network
parameter to be changed, and activate the entry with the

button.
You can now change the setting using the following buttons, depending
on the type of setting:

/

button for simple selection (ON / OFF)
Numeric buttons

to

for entering IP addresses
Alpha-numeric inputfor entering text
When the setting process is complete, or when you have entered the
complete address, press the

button to confirm your action.
Alpha-numeric entry
At certain points, e.g. for entering server names or passwords, it is
necessary to input series of characters (strings). At such points you can
enter letters, numbers and special characters by repeatedly pressing the
numeric buttons on the
FM1000 remote control handset, as when writing
SMS news. The assignment of letters to the buttons is printed below the
buttons. Special characters can be accessed using the

and

buttons:

0 + - * / ^ = { } ( ) [ ] < >

. , ? ! : ; 1 \ " ' _ @ $ % & # ~
Use the blue

button for toggling between numbers, capitals and
lower-case letters. The bottom line of the screen shows which input
mode is currently selected.

At certain points (e.g. DNS server name) it is possible to enter both an
alpha-numeric string and an IP address. At these points an IP address
should be entered like a string (with separating dots as special
characters). In this case an automatic check for valid address ranges (0
… 255) is not carried out.
Closing the
menu
Once you have correctly set all the parameters, select the menu item 'Store
and exit?' , then press the

button. This action causes the
to accept the settings, and you should see the available network media
sources (Internet radio, UPnP-AV server, etc.) displayed in the main menu.
Interrupting
the menu
without storing
the settings
At any time you can leave the network configuration menu without
making any changes to the network settings: this is done by pressing the

button, which takes you to the menu item 'Store and exit?' . If
you wish to quit at this point without saving, use the

/

buttons to select the ‘
Discard and exit?
’ menu item, then confirm with
the

button.