T+A CALA CDR, User Manual, Page: 24 / 72

24
Summer time : The time of day can be set manually in the menu point
' Set time ' .
Winter time : The time of day can be set manually in the menu point ' Set
time ' .
Menu item
Set Time
Manual method of setting the internal clock to the correct time.
Any change you make at this point occurs slowly at first - holding the
button pressed in increases the rate of change.

Manual adjustment is only possible if you have set Summer or Winter in
the menu point ‘Clock mode’.
Menu item
Time display
At this point the time format can be set to 12 hour (AM / PM) or 24 hour
format.
Menu item
Show clock
At this point you can choose whether the time of day is displayed in
standby operation.
Menu item
Brightness
Clock
At this point you can adjust the screen brightness in Stand-by mode to
suit your personal preference. The brightness setting becomes active
immediately.

This menu item appears only if the clock is displayed in standby
operation. See menu item above.
Slumber-function
The machine has a slumber function that switches it to standby after a
selectable time interval between 15 minutes and 12 hours. This selection
can be done in steps of 15 minutes.
Activate
slumber
function
While the is powered up keep the

key of the remote
control pressed until the display shows the slumber time.
Change the
slumber time While the slumber function is active the slumber time can be modified in
steps of 15 minutes using the

/

-keys. Any change comes
immediately into effect.
Turn off
slumber
function While the slumber function is active it can be turned off by keeping the

key pressed until the displaying of the slumber time is not shown
any longer on the display. After switching the function off the device can
be operated in the usual way. Alternatively the slumber function is also
ended when the
is switched off.

As long as the slumber function is active there is no other user operation
possible besides the slumber functions mentioned above and the changing
of the volume.