T+A CALA CDR, User Manual, Page: 22 / 72

22
Alarm Timer
The machine features an integral Timer module which is capable of
switching the
on with a selectable source at a programmable
time (alarm clock).
Selecting an alarm timer in the Alarm Timer menu switches the function
on and activates it. You can now switch the
off. The
will switch itself on at the pre-set time for as long as the set
time is displayed on the screen.

This function is only possible if the Energy Saver is switched off. Please
refer chapter “
Basic settings of the
”.
Alarm function
- with automatic
power-off
If the Timer is active, the switches itself on at the programmed
alarm time. Once switched on, a bell symbol flashes on the screen.
The
switches itself off automatically one hour after the alarm
time, unless the alarm function is disabled during this period.
The alarm function can be disabled by operating or switching off the
device. If the alarm function is disabled, the time display and bell
disappears. If the timer is disabled by operating the device it now does
not switch itself off automatically after an hour! If you wish to switch the
machine off, you must do so manually by pressing the

button.
Switching the
Timer off
A long press on the

button calls up the Alarm Timer menu, where
the timer can then be disabled.

A long press on the

button calls up the Alarm Timer menu even
when the machine is switched off.
Quick
selection menu
A alarm timer set in the alarm timer menu can be selected comfortably,
quick and without switching on the device, by using the quick selection
menu.
A brief press on the

button calls up the quick selection menu.
Further button presses, repeatedly if necessary, select the desired alarm
timer. The alarm time of the selected timer can be adjusted by pressing
the

/

buttons and the volume can be set by pressing the -

+ buttons.
A brief press on the

button enables the selected alarm timer.