57
WLAN setup via access point
The
MP 2500 R
supports setting up the WLAN connection via an access point.
This means that the
MP 2500 R
provides its own WLAN for the duration of the
configuration of the WLAN settings. As soon as the configuration is complete,
this WLAN is deactivated again. The
MP 2500 R
restarts and connects to the
WLAN configured via the app.
Turn on the
MP 2500 R
and open the system configuration menu by
pressing the
button on the remote control or the
button on
the front of the
MP 2500 R
.
Use the
/
buttons to select the menu point “
Network
”,
then confirm your choice with the
button.
Use the
/
buttons to select the menu point “
Access
Point
”, then confirm your choice with the
button.
The
MP 2500 R
activates the WLAN access point..
The following steps must be performed within approximately 5
minutes. After this time, the
MP 2500 R
will exit Access point mode
automatically.
Connect the smartphone or Tablet PC on which the
-App is
installed to the WLAN access point. The network name (SSID) is
"
T+A AP MP 2500 R
“ and the passphrase is “
01234567
”.
Start the
-App for operation.
The app recognizes the access point and starts automatically with the
setup wizard.
To set up the WLAN, go through the individual steps of the app's setup
wizard.
Quit the app, then connect your phone or tablet to your previously set
up wireless LAN.
After restarting the app the
MP 2500 R
will be detected automatically.
Once the
MP 2500 R
is detected, it can be selected for playback.
