T+A Elektroakustik SACD 1245 R User Manual Download

Page: 48 / 56

Approved usage

This  device  is  designed  exclusively  for  reproducing
sound  and/or  pictures  in  the  domestic  environment.  It
must  be  operated  in  a  dry  indoor  room  which  meets  all
the recommendations stated in these instructions.

Where  the  equipment  is  to  be  used  for  other  purposes,
especially  in  the  medical  field  or  for  any  purpose  where
safety  is  an  issue,  it  is  essential  to  establish  the  unit’s
suitability  for  this  application  with  the  manufacturer,  and
to obtain prior written approval for such usage.



equipment which includes a radio or television

receiving section must be operated within the regulations
laid  down  by  the  Post  Office  and  the  Telecom-
munications authorities in the country in which it is used.
This  unit  may  only  be employed to  receive  or  reproduce
those  transmissions  which  are  intended  for  public
consumption.  The  reception  or  reproduction  of  other
transmissions  (e. g.  police  radio  or  mobile  radio  broad-
casts) is prohibited.



The only permissible method of disposing of
this product is to take it to your local collection
centre for electrical waste.

Fitting new batteries:

open

the

battery compart-
ment disconnect
the

latch

pressing  in,  then
lift the cover out.
Remove  the  old
cells  and  fit  new
dry  cells  of  the

LR 03 (MICRO)

type in the battery

compartment, taking care to fit them with correct polarity.
Please remember that

all the cells must be replaced

the same time.

Note:

If you have already re-set the remote control system to
Address 2, you will need to repeat the change procedure
after fitting new batteries.

Note regarding disposal of exhausted batteries:

Exhausted batteries must not be thrown in the
ordinary domestic waste!

In accordance with the battery

decree they should be returned to the battery supplier or to
your local toxic waste collection point, so that they can be
recycled or disposed of safely. Local councils are obliged
to make collection containers available, or to make other
arrangements for collecting exhausted batteries.

Care of the DVD player:

Always disconnect the unit from the mains supply before
cleaning it.

The surfaces of the case should be wiped clean with a
soft, dry cloth only.

Never use abrasive or solvent-based cleaners!

Before switching the unit on again check carefully that no
short-circuits exist at the terminals, and that you have not
disturbed any connections.

Device approval and conformity with EC
directives

In its original condition the unit meets all currently valid
German and European regulations. It is approved for use
as stipulated within the EC.

By attaching the



symbol to the machine,



declares its conformity

with

the

directives

89/336/EEC

, amended by

91/263/EEC

and

93/68/EEC

and

73/23/EEC

, amended by

93/68/EEC

, and the

national laws based on those directives.

The  original,  unaltered  factory  serial  number  must  be
present  on  the  outside  of  the  unit,  and  must  be  clearly
legible.  The  serial  number  is  a  constituent  part  of  our
conformity  declaration  and  therefore  of  the  official
approval for operation of the device.

The serial numbers on the device and in the original



documentation supplied with it (in particular the inspec-
tion and guarantee certificates), must not be removed or
modified, and must match exactly.

Infringing any of these conditions invalidates



con-

formity  and  approval,  and  the  unit  may  not  then  be
operated  within  the  EC.  Improper  use  of  the  equipment
renders  the  user  liable  to  penalty  under  current  EC  and
national laws.

Any  modifications  or  repairs  to  the  unit,  or  any  other
intervention  by  a  workshop  or  other  third  party  not
authorised  by



, invalidates the approval and

operational permit for the equipment.

Only genuine



accessories may be connected to the

DVD player, or such auxiliary equipment which is itself
approved, and fulfils all currently valid legal require-
ments.

When  used  in  conjunction  with  auxiliary  devices  or  as
part  of  a  system,  this  device  may  only  be  used  for  the
purposes  stated  in  the  section  entitled

Approved

usage

FCC Information to the user

(for use in the United States of America only)

Class B digital device
– instructions:

Note: This equipment has been

tested  and  found  to  comply  with  the  limits  for  a  Class  B
digital  device,  pursuant  to  Part 15  of  the  FCC  Rules.
These  limits  are  designed  to  provide  reasonable
protection  against  harmful  interference  in  a  residential
installation.  This  equipment  generates,  uses  and  can
radiate  radio  frequency  energy  and,  if  not  installed  and
used  in  accordance  with  the  instructions,  may  cause
harmful  interference  to  radio  communications.  However,
there is no guarantee that interference will not occur in a
particular  installation.  If  this  equipment  does  cause
harmful  interference  to  radio  or  television  reception,
which  can  be  determined  by  turning  the  equipment  off
and  on,  the  user  is  encouraged  to  try  to  correct  the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit
different form that to which the receiver is connected.

Consult the dealer or an experienced radio/TV
technician for help.