T+A Elektroakustik SACD 1245 R, User Manual

Page: 38 / 56

38
Operating the SACD 1245 R
Switching on
Press the     button on the front panel of the unit.
The green indicator LED above the button lights up, as
does the display screen. The unit is now ready for use.
For Stereo playback (CD /SACD) switch ON your HiFi
system and select the audio input the
SACD 1245 R is
connected to.
Loading a Disc
1. Press the     button on the front panel to open
the drawer.
2. Place the disc in the centre of the circular recess in
the drawer, with the side to be played facing down.
3. Press the     button on the front panel to close
the drawer.
Starting playback
CD and SACD are started by pressing the     -
button.
Stopping playback
You can stop playback at any time by pressing the

 

button.
Selecting a Title
1.) Selecting using a skip button
You can initially select CD titles by pressing the skip
forward button

 

or the skip back button

 

repeatedly
until you reach the desired point.
2.) Selecting track - direct numeric input
It is also possible to select a CD track by entering the
number of the section using the numeric buttons
(
    . . .     ) on the remote control handset.
Note:
If the number has more than one digit, press the digits
quickly in sequence.
SEARCH
The standard search takes place at quadruple speed,
and is started by pressing the front panel buttons
    /     or the remote control buttons     /     .
Press the search button again to increase the search
speed to 32 times normal speed. The search can be
stopped at any time by pressing the
    button.
The sound is muted during the search process.
REPEAT
The device offers several REPEAT -modes for repeating
chapters, titles or entire discs:
•
SACD Titel / Area (Bereich) / aus
• CD Titel / Disk / aus
REPEAT mode Screen display
(short message)
Screen display
(persistant)
Title
Track
REPEAT RT
Disc
Repeat Disc
RPT DSC
RP
Off RPT OFF
Area RPT ARA RA
To switch on and select a REPEAT mode press the

 

button on the front panel repeatedly until the
desired mode is displayed.
REPEAT using the F1/F6 remote control handset
•
The REPEAT -modes can be selected with the    
button.