T+A Elektroakustik SACD 1245 R, User Manual

Page: 39 / 56

39
Creating a MEMO program
Explanation:
A MEMO program can store up to 30 tracks of a CD in
any sequence, e.g. for making a cassette recording. The
MEMO program can only be created for the CD currently
in the machine. It remains stored in the CD player until
either you erase it or the CD drawer is opened.
Procedure:
When you insert the CD the screen displays the message
'STOP' followed by the total number of tracks on the CD.
•
Activate MEMO programming.
briefly press the     -button
Select the menu item ' PROG PROG PROG PROG NEW NEW NEW NEW ' with the     /
    buttons and activate it by pressing the
    -button.
The screen shows: 'PROG' and a flashing number as
an invitation to enter information.
•
Press the     respectively the     button until
the number of the desired track lights up on the
display behind the
'PROG' message.
•
Now store the track in the MEMO program by
pressing the     button briefly.
The title number flashes once to confirm that this track
has now been accepted as the first track in the MEMO
program. Select all the other tracks you wish to include in
the same way, storing each by pressing the

 

button briefly.
Note:
The track you wish to select can also be entered directly
using the numeric buttons instead of the

 

and
    buttons. After entering a number you can store
the track in the usual way by pressing the
   
button
briefly.
When you have stored the 30th track the screen shows
the message
'FULL' . If you enter a further number, the
last stored track - the previous 30th one - will be
overwritten.
After you have stored all tracks in the MEMO program,
end the programming procedure as follows:
• End MEMO programming.
Hold the     button pressed in for about 1 second
The screen shows the message 'STORED' .
Playing back a MEMO program
The MEMO program can now be played back.
•
Start playback process 
 
 button
Playback begins with the first track of the MEMO
program.
While the MEMO program is running, the

 

and
    buttons select the previous and next tracks
respectively, but only within the MEMO program.
Erasing a MEMO program
Pressing the

 

button briefly in STOP mode opens
the CD drawer, and this action erases the MEMO
program.
A MEMO program can also be erased without opening
the CD drawer:
•
Activate MEMO programming
briefly press the

 

-button
Select the menu item '' PROG PROG PROG PROG CLR CLR CLR CLR ' with the     /
    buttons and activate it by pressing the
    -button.
The screen now shows the message: ' CLEARED CLEARED CLEARED CLEARED ' .
The MEMO program is now erased.