background image

FURTHER SETTINGS AND INFORMATION

ACTIVATE FUNCTIONS 
BY SELECTING THE 
ICONS

LARGE CIRCLE 
CONTINUES TO 
DISPLAY THE SET 
COLOUR

USE ESC BUTTON TO 
SET  OR WAIT FOR A 
TIME-OUT

ENTRY SCREEN

TO ENABLE CLEANING MODE 
TOUCH THE ICON

SELECT COG WHEEL TO 
ENTER MAINTENANCE 
MODE (REQUIRES 
PASSWORD)

SELECT LOCK ICON TO 
LOCK THE THERMOSTAT 
FROM TAMPERING

SELECT CLEANING ICON 
TO ENABLE CLEANING 
MODE. THE DISPLAY 
WILL COUNT DOWN 
FROM 30 SECONDS
DURING WHICH ALL
BUTTONS ARE DISABLED
ALLOWING SCREEN
CLEANING. 

PRESS OFF BUTTON 
TO SWITCH THE
INTERFACE OFF

30

Clean Screen

MODIFY SWITCHING 
SCHEDULE (ONLY 
SRI-P70)

SET TIME AND DATE
(ONLY SRI-P70)

SyxthSense Ltd

Copyright © 2018 SyxthSense Ltd. All rights reserved - 04/2018 

PS 

MOD3.103

 - 6/23

Online store: 

www.syxthsense.com

Enquiries: T: 

44 (0)1392 875 414   

E:

 [email protected]

The FURTHER SETTINGS screen is protected by the Staff Code. As default the Staff Code is 
disabled (0000). If activated, the user will need to enter the 

Staff Code 

to enter the screen.

Fan Speed Display and  
Manual Override

The SRI75 has fan icon and line bar to indicate the fan speed. It is also possible to use the line bar 
only to indicate other signals by disabling the fan icon.

The fan and line bar display is 
configured by a parameter. 
The options are:-

OPTIONAL FAN 
SPEED AND 
MODE INDICA-
TION
A =AUTO
M = MANUAL

71

.5

°F

Room

67

.1

°F

A

PRESSING THE 
FAN DISPLAY 
THE FAN 
SPEED CAN BE 
MANUALLY 
OVERRIDDEN

‘A’ IS DISPLAYED WHEN UNDER AUTO-
MATIC CONTROL (NETWORK), IF FAN 
MANUAL MODE PARAMETER HAS AUTO 
OPTION SELECTED.
 
WHEN FAN SPEED IS 1 TO 6 FAN ICON 
ROTATES. 

A

FAN AUTOMATIC 
CONTROL

Speed 1

A

Speed 2

A

Speed 0 

A

COLOUR LINE
BAR (OPTION)

A

Speed 3

A

Speed 4

A

Speed 5

A

Speed 6

°F/

°C

DISABLED (Default)

FAN AND LINE BAR 

LINE BAR ONLY

FAN  ONLY

FAN AND COLOUR 
LINE BAR 

COLOUR LINE BAR 
ONLY

When the fan level set to 
more than OFF (Speed 0) via 
network or manually (if 
enabled), the fan icon rotates. 
The current fan/level is 
displayed by the shading of 
the line bar (in 6 steps/bars).

The shading of the bar can be 
set to follow greyscale, or green/yellow/red colour scheme. 

Summary of Contents for SRI-75 Series
























Reviews: