background image

Online store: 

www.syxthsense.com

Enquiries: T:

 +44 (0)1392 875 414  

E:

 [email protected]

PS 

MOD3.103

 V1.00 - 1/23

SRI-75 and SRI-P75 Series Modbus 

/ BACnet Room Interfaces

The SRI-75 series Modbus / BACnet Touchscreen user interfaces 
provide modern looking low profile user interface and I/O-module 
for flush mounting in room spaces.

The SRI-75 series interfaces have attractive 3.5" backlit 
touchscreen with smart designer interface. SRI-P75 versions have 
7-day time clock to provide network clock facility.

The MOD models have built-in Modbus RTU communications and 
the BAC models provide BACnet MS/TP communications. 

Features

• 24VAC/DC Power Supply
• 3.5" Inch Backlit Touchscreen Display
• BACnet and Modbus Communication Models
• P-Versions have 7 Day and 5+2 Day Schedule
• Flush Mounting in the UK, EURO and US Wall Mounting Box
• Attractive Modern Designer Look
• Built-In Temperature Sensor
• 2 x Remote NTC10 Sensor Inputs

• 24V 5A Switched Network Relay 
• Digital Input for Overrides / Measurement

Product sheet   

MOD3.103

Type 

SRI-75

Model Type

Model

Description

SRI-75-MOD

Modbus 3.5" Touchscreen User Interface, 24Vac/dc Power 
Supply, Extra Low Voltage

SRI-75-BAC

BACnet MS/TP 3.5" Touchscreen User Interface, 24Vac/dc 
Power Supply, Extra Low Voltage

SRI-P70-MOD

Modbus 3.5" Touchscreen User Interface with 7-Day Time 
Clock, 24Vac/dc Power Supply, Extra Low Voltage

SRI-P70-BAC

BACnet MS/TP 3.5" Touchscreen User Interface with 7-Day 
Time, 24Vac/dc Power Supply, Extra Low Voltage

RH

Relative Humidity Option, 2%rH Accurate

Summary of Contents for SRI-75 Series
























Reviews: