Online store:
www.syxthsense.com
Enquiries: T:
0870 20 80 100
F:
0870 20 80 200
PS
SN1.125
- 1/5
RY-FL Wireless Input / Output
Module
RYFL is a wireless locally powered 230 Vac transmitter using
868.30 MHz frequency and FSK modulation. It is for providing
building automation measurements and controls wirelessly.
RYFL can control two inputs and outputs. Individual input is
possible to set 0-10 V or potential free. For instance 0-10 V
transmitter can be used with 24 Vac auxiliary supply.
Individual output can be selected between 0-10 V (and PWM) or
230 Vac relay. There is a two-way communication between
transmitters and the base station. RYFL transmits the signals to
the FLTA every 6 s.
Each wireless transmitter, repeater and base station needs to
have a unique address. Each transmitter address consists of two
parts; SID (sensor ID) and MID (master / base station ID). These
addresses will be configured wireless by using FLSER service
tool.
The transmission area can be extended by using FLREP
repeaters between transmitters and the FLTA base station.
Product sheet
SN1.125
Sensor type
RY-FL
Model Type
Model
Description
RY-FL
Wireless Input / Output Module, 230Vac Power Supply
RY-FL-24
Wireless Input / Output Module, 24Vac Power Supply
Technical Data
Power Supply
230Vac 12VA
Frequency
868.30 Mhz
Modulation
FSK
Range
Line of sight: Up to 500m
In buildings up to 20..100m depending on wall strcutures
Range can be extended up to 2 times with FLREP repeaters
Transmission Power
+8 dBm
Reception Sensitivity
-109 dBm
Addressing
Via FLSER Service Tool
Inputs (2 configurable)
Analogue, 0..10Vdc
Digital, Potential Free
Outputs (2 configurable)
Relay, 250Vac, 10A
Analogue, 0..10Vdc
Auxiliary Supply, 24Vac
Triac (PWM), 24Vac, 1A, seq., 20 s.
Input / Output Accuracy
+/- 0.5 %
Ambient Temperature
-40 .. + 50 degC
Ambient Humidity
0..100% rH Non-Condensing
Enclosure
IP20 ABS Plastics
Dimensions
W150 x H210 x D110mm
NOTE:
RY-FL requires FLTA version 2.2 or later and FLSER
service tool version 2.2 or later.
