background image

 

 

WELCOME 

 
Thank you for purchasing the new hair clipper SY-HC32. In order to benefit fully from this 
product please read the following instructions carefully. Store the instructions manual in a 
safe place for future reference. 
 

IMPORTANT SAFEGUARDS   
 

  Before the first use of the appliance check that the voltage indicated on the rating 

label corresponds to the mains voltage in your home.   

  For home use only. Do not use for industrial purposes. Do not use the appliance for 

any other purposes than described in this instruction manual.   

  Do not use outdoors.   

  Always unplug the appliance from the power supply before cleaning and when not in 

use.   

  To prevent risk of electric shock and fire, do not immerse the appliance in water or 

any other liquids. However if this does occur DO NOT TOUCH the appliance, unplug 
it immediately and contact your near service center.   

  Do not take this product to a bathroom or use near water. 

  Do not immerse the recharging stand or adaptor in water. 

  Never charge the unit near water. 

  This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliances by 
a person responsible for their safety.   

  Children should be supervised to ensure that they do not play with the appliance.   

  Do not leave the appliance switched on when not in use.   

  Do not use other attachments than those supplied.   

  Do not operate after any malfunction, cord damage, battery leak, charging stand 

damage or adaptor damage. 

  Do not attempt to repair, adjust or replace any parts of the appliance. Check and 

repair any damages by contacting Sytech Service Center.   

  Keep the cord away from sharp edges and hot surfaces.   

  Do not place or store the appliance where it can fall or be pulled into a tub or sink.   

  Do not pull, twist, or wrap the power cord around the appliance.   

  Never insert any objects into the openings of the appliance. 

  Before use, make sure that blades are adjusted properly.   

  Do not place the appliance while it is operating on any surface, it may cause injury or 

damage.   

  Do not use the appliance with a damaged comb, or with teeth missing from the 

blades as injury may occur. 

NOTE: KEEP THE BLADES OILED

 

  Do not use the hair clipper when the skin is infected.   

  Do not use the hair clipper on animals.   

  The manufacturer reserves the right to introduce minor changes into the product 

design without prior notice, unless such changes influence significantly the product 
safety, performance, and functions.   

 
 

 
 

Summary of Contents for SY-HC32







Reviews: