Place a towel around the neck and shoulders of the person getting the haircut.
Before cutting always comb the hair so it is tangle free.
REMINDERS
Cut the hair in an even and slow manner. Use short strokes only and work gradually
over the entire head.
Always take off a little hair at a time; you can always trim off additional hair later.
As you work, comb the hair frequently back into the style to which you are cutting.
When cutting with this hair clipper it is better to leave the hair dry, not wet. With dry hair,
it is much easier to control the amount of the hair being cut.
Cutting hair requires practice so it is always better to leave the hair longer for the first
few haircuts until you become used to the hair clipper levels and how much hair does
each level cut.
BLADES CLEANING AND MAINTENANCE
Before cleaning and maintaining this hair clipper, please ensure that the switch is
disconnected and that no water is present around the area where you are cleaning the unit.
Remove the adjustable comb by simply pulling it upwards.
Pull the shaving head towards the back and remove it (1).
Using the brush, brush out all the extra hairs from the shaving head insert(the area
behind the shaving head when it has been removed) (2)
Put 2-3 drops of oil on the blades.
Reinsert the shaving head by inserting the latch of shaving head into the casing and
press it until
you hear a ‘click’ sound(3)
BLADE LIFE
This hair clipper is equipped with stainless steel blades. It provides high sharpness and
a longer life span of the blades.
If your clipper stops cutting, your cutting blades have worn out. Replace them with new
blades.
Blade life will vary according to the frequency and length of use.
STORAGE
Keep the appliance in a dry place.
The blades must be oiled during storage period.
