8
In the first phase (steam-damping of the fabric), hold the iron about 20 cm. above
The fabric and press the steam button (10). Pass the iron over the garment in a circular
movement so that the powerful jet of steam dampens the fabric. Lightly creased garments
require only a few moments of steaming. While very heavy fabrics or garments with particularly
difficult creases must be more damp, so steam must be applied for a few seconds more.
During the second phase (dry ironing), check that the thermostat knob is in the correct position
for the type of fabrics; release the steam button (10) and dry-iron the garment. The special
ironing plate will prevent the fabrics from becoming shiny. Using this ironing technique, and
following the suggestions in the chart above, you will find it easy to give your garments a really
professional ironing finish.
CLEANING
-Before cleaning the iron, disconnect it from the power supply and allow it to completely cool
down on the iron stand (8).
-Clean the boiler tank every three months by carrying out the following the procedure:
- unplug the iron from the wall socket;
- fill the boiler tank with normal tap water, rinse and drain;
- clean the appliance using a wet cloth.
SPECIFICATIONS
Steam Station
Steam and dry ironing
Aluminum soleplate
Cork handle with ergonomic grip
Stainless steel boiler
Adjustable temperature and steam
Continuous steam function
2 separate on/off switches for iron and boiler
Steam ready indicator light
Low water indicator light
Abrasion resistant cord
Anti-scale system
Tank Capacity: 1 litre
Heating time: 3-4 minutes
Steam pressure: 3.5 bar
Steam output: 60g/min
Power: Water boiler: 1350W
Iron: 850W
Power: 2200W / 230V-50Hz
Summary of Contents for Easy Life SY-EP22
Page 1: ......
