PAGE
35
Section 6 • Operation
If a zone is active and a Paging signal is
received, the volume level decreases to
zero and the DMS displays '(())'. If a
Paging signal is received while the zone
is muted, the DMS display will
immediately show '(())'.
If the zone is in standby mode and a Pag-
ing signal is received, the DMS will dis-
play the appropriate greeting for the time
of day and then '(())'.
d) Automatic Brightness Adjustment: An
ambient light sensor in the DMS module
adjusts the brightness of the display as
the background lighting varies, to give a
more even perceived brightness.
e) Engaged Indication: If a source is
engaged, the leading character of the
selected source is shown in lower case.
f)
Internal Battery Indication: If the time
display flashes when a DMS module is
first connected, this indicates either that
the clock has not been set or that the
battery has not been enabled - see
Section 4.21 DMS Module. If the display
flashes after the system has been turned
off for a period of time, this indicates that
the internal battery charge is low. The
clock time should be reset to stop the
flashing and the system left On for a few
days to recharge the internal battery.
6.44 Operation
With the zone in Standby, the DMS
module displays the time. Use the
handset or keypad as previously
described in Sections 6.2 and 6.3 to select
the required functions.
6.45 Setting Alarms and Time
With the DMS zone in Standby mode,
press the alarm button. The display will
show the first 'Mode' function.
Repeatedly pressing the alarm button will
step through the remaining functions and
return the DMS to Standby mode (a total
of five steps).
ZONE ENGAGED
SOURCE SELECTED
1. Select Alarm
Press the hrs/A button to select alarm off,
or the mins/B button to select alarm on.
3. Select Source
Select the source to play when the alarm
is activated. Press the hrs/A button to
select tuner, or the mins/B button to
select CD.
2. Set Alarm Time
The display will show the last alarm time
set. Use the hrs/A and the mins/B
buttons to advance to the required alarm
time.
NOTE: Make sure that the pm indicator is
also showing the correct 12hr period for
the alarm.
ON
OFF
36
