PAGE
Section 6 • Operation
6.21 Input Selector Buttons
Depending on system status, pressing any
of the input buttons TUNER, CD, TAPE/SAT
or VID/DVD will do one of the following:
a) If the entire system is “Off” (i.e., the S4.3
Controller is in “Standby” mode and the
source components are powered from the
switched a.c. mains outlet), pressing any
input button will activate the zone, power
up the source components and start the
source playing.
b) If only the requesting zone is in “Standby”
(and the rest of the system, including
sources, is active), selecting an input will
enable that zone’s microprocessor-
controlled switching circuitry and direct
that source’s output to the requesting zone.
If the requested source is not already in use
by another zone, selecting the source will
also engage Play mode.
c) If the requesting zone is already playing a
different source, pushing another input
selector button will simply choose the new
source.
d) Input selector buttons for CD, TAPE/SAT
and VID/DVD double as “Play” command
buttons for their respective sources. This is
important when a source is in “Stop”
mode: Simply press the proper input
selector again to resume play.
6.22 Tuner (Source 1) Control
Buttons
Ensure that the tuner aerial is connected
and stations programmed into memory
before checking this handset feature.
a) TUNER: This selects source 1.
b) FAV. STN (Favourite Station): This will
select the first station (Preset No.1)
programmed into the tuner’s memory.
c) - PRESETS: This selects the next PRE-
PROGRAMMED station LOWER in
frequency than the one playing.
d) P: This selects the next PRE-
PROGRAMMED station HIGHER in
frequency than the one playing.
NOTE: BOTH - PRESETS and
P select only pre-programmed
stations; they do not perform a station
search.
6.23 CD (Source 2) Control Buttons
a) CD: This selects source 2.
b) STOP: This button stops the CD.
c) RANDOM: This instructs the single CD
player to play tracks in a random order.
On Multi Disc CD Players random tracks
are selected from the disc library.
d) DISC (functional only with multi-play CD
players): This advances the CD player to
the next available disc.
e) SKIP
: This advances the CD player to
the next track on the disc being played.
f)
SKIP : This button reverts to the
beginning of the track being played. Two
quick pushes access the previous track.
6.24 Tape/Satellite or Cable (Source
3) Control Buttons
a) TAPE/SAT: This selects source 3.
b)
-
(Rewind):This rewinds the tape.
Press the 'Tape' button to put the deck
back into PLAY mode.
FOR SATELLITE RECEIVER, this function
decrements the channel number.
c)
+ (Fast forward): Same as b) above
but in the opposite direction.
FOR SATELLITE RECEIVER, this function
increments the channel number.
30
