Systembase C300xr
0018-013-009
Page 28 of 28
Table 4 :-
MGR OP Connector Pin out
9.
Physical Properties
Enclosure
1U High 19" Rackmount
Dimensions
480mm (W) x 200mm (D) x 45mm (H)
Weight
2.5Kg
10.
Power Requirements
Voltage Requirement
85 - 260 VAC 60/50Hz Auto-ranging
Power Consumption
20W
Fuse Rating
500mA Anti-Surge
Connector Type
IEC Mains Plug
11.
Calibration Information
When using the C300xr VU Meters during calibration, it is recommended that the test tone
signal is set to 975Hz instead of 1KHz. This is to ensure that the sample rate and the test tone
signal do not beat / interfere with each other.
Systembase Limited, PO Box 3572, Warminster, Wiltshire, BA12 6XQ, UK
Tel: +44 1747 861123, Fax: +44 1747 861133
Website:
www.systembase.com
, E-Mail:
Information furnished is believed to be accurate and reliable at the time of publication. The manufacturer reserves the right to change details without notice.
apt-X is a trademark of Audio Processing Technology Ltd. All trademarks and tradenames acknowledged.
Copyright 1997-1998 Systembase Limited - Printed in the UK - All Rights Reserved.
Pin Number
Description
1
2
TXD OUTPUT
3
RXD INPUT
4
5
SIGNAL GND
6
7
8
9
