Systembase C300xr
0018-013-009
Page 20 of 28
Press the
YES
button to save the changes, and the
NO
button to abort the changes:
MENU : Loopback
STATUS : Loop On
NOTE : The loopback function has been disabled when operating in either Dial On Audio or
Backup Master / Slave Modes.
4.6
ISDN Country Options
There are a number of ISDN parameters associated with different countries and regions in the
world, these can be readily re-configured on the C300xr Codec.
NOTE : It is important that the ISDN line should be disconnected from the unit before any
changes are made.
4.6.1 ISDN Country
The C300xr can be re-configured to operate on 1 of 10 International ISDN Standards.
MENU : ISDN Country
STATUS : EURO ETSI
The
>
button is used to select the ISDN Country / Standard, the display changes as follows:
EDIT : ISDN Country
OPTION : EURO ETSI
The
^
and
V
buttons can be used to scroll through the options:
OPTIONS : EURO ETSI, Eire, France VN3, Israel*, Japan, Australia*, Holland,
DMS100 (USA), Custom 5ESS (USA), National 1 (USA)
*Pending Approvals
Press the
YES
button to save the changes, and the
NO
button to abort the changes. Then
confirm the change by pressing YES and wait while the C300xr is configured for the new
ISDN Country:
MENU : ISDN Country
STATUS : Holland
4.6.2 ISDN SPID 1 / 2 (USA Only)
MENU : ISDN SPID 1 / 2
Null
The
>
button is used to edit the ISDN SPID Codes which are required for operation in the USA
(National 1, DMS100 & Custom 5ESS). The display changes as follows:
