34
4. Configure room temperature sensor: Go to
Input
menu. Select
ANALOG
tab. Select the analog input to which the
sensor is connected. Example if it is connected to AI6 on the connection board, then select
ANALOG INPUT 6
. Select
input type as
Room Air Temperature Sensor (RAT)
.
7.3
Temperature control
7.3.1
Internal electrical reheater
Electrical reheater is used for supply air heating during cold outside temperatures. Electrical reheater should be installed
inside of the unit.
• ELH — Electrical heater
• OHT — overheat protection sensor
• 1 — Outdoor air
• 2 — Supply air
• 3 — Extract air
• 4 — Exhaust air
Component/product — Article number:
• ELH VTC 500 R — 158105
• ELH VTC 500 L — 158109
Installation and connection
1 Remove the cover of reheater by loosening screws at the front (pos. 1).
2 Remove knobs (pos. 2) that will hold reheater in
place. Insert electrical reheater (pos. 1) into dedicated
compartment, secure reheater with previously re-
moved knobs (pos. 2).
| 01_1.8.0
Summary of Contents for SAVE VTC 500
Page 4: ......
