SystemAir HAN 13, Installation And Maintenance Manual

Page: 11 / 40

English
9 HAN
The unit is not designed to withstand weights or stresses from adjacent equipment, pipe work
or constructions. Any foreign weight or stress on the unit structure could lead to a malfunction
or a collapse with dangerous consequences for personnel and property. In such an event, the
warranty shall be null and avoid.
9. INSTALLATION
²
The building structure must be capable to carrying the weight of the unit during operation.
²
The place of installation must not be subject to flooding.
²
The HAN should be installed on a flat, clean surface without any obstacles. The surface area must be
sufficient to spread the weight of the unit over the building structure.
²
Ensure that the recommended free clearances around the unit are maintained to avoid any risk of
malfunctions.
²
Ensure that there are no obstructions around the condenser or the air outlet to avoid any risk of
recycling old air.
²
In addition to the service clearances stated on the dimensions sheet, it is imperative to provide a
safe and appropriate access to the unit for repairs and servicing.
²
The installer is responsible for providing the weaterproof seal between the building and the HAN . The
installer must be fully versed in the practice of roof mounted equipments and must comply with the
recommendations and rules detailed in the Technical Directives.
²
In order to avoid risk of condensation and energy losses, all outdoor ducting and piping must be
insulated.
9.1. PLACE OF INSTALLATION AND REQUIREMENTS
SEE APPENDIX
13-15-17-19 25-31
A mm
800 800
B mm
800 800
C mm
800 800
D mm
850 1000
E mm
3000 3000
9.2. CLEARANCE
9.3. ATTACHMENT TO THE GROUND