manualshive.com logo in svg

SystemAir F-R60, Manual, Page: 6 / 49

Share
Download
SystemAir F-R60 Manual Download Page 6

6/49 | 

F-R60

Inspection possibility

Inspection of blade and gaskets can be done through electro thermal fuse opening with an endoscopic camera. 
Manually operated additionally by removal of the mechanism through opening for its thermal fuse. In order to access 
the damper's internal parts a flexible connection or duct with access doors must be connected to the damper.

Maintenance

Not required. Dry cleaning if legaly required in the country in which the dampers are installed.

Revisions

Determined by law in the country in which the fire dampers are installed. Recommended at least every 12 months.

Allowed pressure

1200 Pa

Declared blade tightness (EN 1751)

Class 3 as standard up to 500 Pa

Declared housing tightness (EN 1751)

Class C as standard up to 500 Pa

Conformity with EC directives

2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility Directive

Driving actuator types

Belimo BFL, BFN; Gruner 340-…-05, 360-…-12

Transport and Storage

Dry indoor conditions with a temperature range of -20 °C to +50 °C

Summary of Contents for F-R60


















































Reviews:

No comments