11
De-installation / dismantling
HAZARD
Hazard of explosion of an ignition-capable gas/air atmosphere!
Do not open or tip the fan if an explosive atmosphere exists.
WARNING
Risk from electrical voltage!
›
Switching off and de-installation only by a trained electrician or trained and instructed qualified per
-
sonnel!
›
Pay attention to the 5 rules of electrical engineering:
–
clear (all-pole separation of an electrical system from live parts),
–
secure against switching on again
–
establish freedom from voltage,
–
earth and short-circuit,
–
cover or fence off neighbouring live parts..
"
Carefully disconnect all electric lines.
"
Disconnect the EX fan from the supply connections.
CARE
Risk from impacts and cutting!
›
Wear protective gloves when dismantling!
›
Dismantle carefully.
"
Remove the fitting material carefully.
"
Place the EX fan on the floor.
12
Disposal
Both the device and the matching transport packaging comprise recycling-capable raw materials to a very great extent.
12.1
Disposing of the EX fan
If the EX fan is to be finally dismantled and disposed of, proceed as follows:
"
Switch the EX fan free of voltage.
"
Disconnect the EX fan from the supply connections.
"
Dismantle the EX fan into its component parts.
"
Separate the parts resulting from this according to
–
reusable components
–
material groups to be disposed of (metal, plastic, electrical part etc.)
"
Ensure that the parts are recycled again. Pay attention to the national directives.
12.2 Disposing of packaging
"
Ensure that the parts are recycled again. Pay attention to the national directives.
De-installation / dismantling
67
