pag.
6
Industrial PC - MONITOR COPILOT 21,5"
Order Code 2E000xxx
May 2018 - Rev. 1.1
operation and calibration
The
Copilot 21.5'' Monitor
has an innovative capaci-
tive backward-projected touch screen (PCAP) with 10
possible touches at the same time.
System Electronics can provide different settings to co
-
ver the different needs of the operator interface: from
operation with gloves or in dirty environments to the
optimization in the precision of touch, up to the natu-
ralness of gestures with Windows (rotation, movement
and zoom with the hand).
The
21.5" Copilot Monitor
is supplied already calibra-
ted and equipped with a setting that typically covers all
needs without penalizing any of them: however, there
are commands to customize the behavior according to
the specific application.
5.1 Touch-screen calibration:
The
Copilot 21.5" Monitor
does not normally require
calibration procedures, as it is already optimized during
production.
If there is a need to optimize touch-screen calibration,
follow the procedure below.
5. Touch-screen:
6. Configuration and
Menu:
To access the menu configuration buttons, remove the
three 3 screws on the top metal cover using an Allen key.
In the Tablet PC Settings section, press the "CALIBRATE"
button:
To test the calibration of the touch screen, touch the
crosshairs each time they appear on the screen with
one finger.
Click at random on the screen to return to the last ca-
libration.
Press ESC to exit.
Do not change the orientation of the monitor before
completing the calibration process.
5.2 Default settings of the touch
parameters:
To reset the factory settings again, select the "RESET"
button from the TABLET PC SETTING window:
NOTE
The Copilot 21.5" Monitor does not require specific dri
-
vers; the native Windows drivers are used for touch-scre-
en operation.
Menu Select Down Up Led Power
Figura 6.1 Buttons scheme. Front Monitor View
The buttons are arranged according to the following
diagram:
