- 38 -
699-41-20.1
A grease nipple (5) is attached to one face side of the inside vehicle (1).
Perform lubrication with an oil press.
Grease passes through the grease nipple (5) in the bearing of the spindle
(3), as well as in the bearing of the guides (4).
Lubrication interval
Under normal use, lubricate every 100 km. For other operating condi-
tions shorten the maintenance intervals.
6.8.5
Lubrication axis type DuoLine
All linear units are provided in the factory with the required lubricant
quantities. The maintenance intervals are determined by the number of
operating hours, loads and ambient influences. For servicing, the guide
slide (1) is to be positioned centrally over the cover (2) and opened.
Fig. 30 Slide position for maintenance purposes
6.8.5.1
Lubrication of the section slide
Lubrication of the
section slide
The guide slides are lubricated directly via the grease nipples. Clean
grease and oil from the lubrication point before lubricating.
Ensure that the grease gun is axially aligned with the flow direction of the
funnel-type lubricating nipple.
A high-pressure grease gun with a needle extrusion tip must be used to
lubricate the RK DuoLine 50x50, 80x80 and 80x120(II) units.
A high pressure grease gun with an extrusion tip must be used to lubricate
the RK DuoLine 80, 120 and 160 units.
Lubrication interval
Lubrication every 1000 km
Lubricant
Recommended lubricants: Grease in accordance with DIN 51818 Vis-
cosity class: NLGI class 1, NLGI class 00
For use in max. range: Grease in accordance with DIN 51818 Viscosity
class NLGI class 2
Lubricant quantities
Version
Lubricant quantities
DuoLine 50x50
2 x 0,4 cm3
DuoLine 80x80
2x1,4 cm3
DuoLine 80 x 120
2x1,4 cm3
DuoLine 80x120-II
2x1,6 cm3
