7.2 Storing the device
NOTICE!
Material damage caused by incorrect storage.
Incorrect storage can damage the device.
– Pay attention to the handling symbols on the pack-
aging.
– Comply with the stated storage conditions (see
Ä
Chapter 7.2 “Storing the device” on page 35
).
When storing the device, comply with the following requirements:
n
Use the original packaging.
n
Do not apply any localized pressure to the display.
n
Do not store in the open air.
n
Always store in a dry, non-dusty place.
n
Always shield the equipment from solar radiation.
n
Avoid mechanical vibration and shocks.
n
Avoid cold weather and extreme temperature fluctuations.
n
Pay attention to the information in the “Technical data” section.
Ä
Chapter 3.3 “Technical data for the device” on page 13
Storage conditions
Storage
Storing the device
PILOT 217 monitor/thin client - Industrial monitor/thin client
35
Summary of Contents for PILOT 217
