Software
Manual SCA-340 / SCA-340-L
sysmik.de
29
The local access offers several services and protocols to the PC for configuration
and diagnosis.
Protocol Port
PC-Software
Application
Telnet
23
Telnet client
SCA system shell
HTTP
8080
Web browser
commissioning website
Table 4.1.1:
Protocols of local access
4.1.1
SCA System Shell
The SCA System Shell allows to configure fundamental settings of the Scalibur. To
this end, the PC is connected via USB-OTG to the Scalibur and then a Telnet client
is used on the PC to establish a Telnet session with the Scalibur (address
172.16.0.10
/ port
23
).
The SCA System Shell shows host ID, version information of several software
components, the current time, and the IP addresses of the Scalibur. A number-
based menu allows to perform different actions:
1. Update System Time
configure current system time
2. Update IPv4 Settings
configure IP addresses
3. Update IPv6 Settings
configure IPv6 addresses
4. Switch Configuration
configure the Ethernet switch (Ethernet
port assignment to IP interface, RSTP,
ring monitoring, broadcast storm
protection)
5. Ping IPv4 Host
ping an IP address from the Scalibur
6. SSH/SFTP usage
start/stop SSH/SFTP server
7. Sedona/Niagara Enable
activate/deactivate Niagara and Sedona
8. IO Server
configure IO server (port number,
remote address)
9. Sedona Factory Default
reset Sedona app and Sedona kits to
state of delivery
10. Reset Platform Credentials
reset Platform credentials to default
(user
sysmik
/ password
intesa
/
Daemon HTTP Port 3011 / Daemon
HTTPS Port 5011
)
11. Reboot
reboot Scalibur
x. Exit
exit Telnet session
4.1.2
Commissioning Website
The commissioning website allows to configure the Scalibur and to access data
points of connected IO terminals.
To this end, a PC is connected via USB-OTG to the Scalibur and the following URL
is entered in the address field of the web browser:
172.16.0.10:8080