TFT/HxxxxPU71x16-xxx: user documentation
DOC/Protouch-71; V1.0
© Syslogic Datentechnik AG, CH-5405 Baden-Dättwil, Switzerland, http://www.syslogic.com
7
/
27
1.5.
Items delivered
1.5.1.
Built-in version
-
1x TFT/HBxxxPU71G16-xXXXE
-
1x Fixing Frame with M4x10 securing screws
-
1x Power supply connector Weidmüller BCZ 3.81/04/180F SN SW (1792970000)
1.5.2.
VESA mount version
-
1x TFT/HVxxxPU71F16-xXXXE
-
1x Power supply connector Weidmüller BCZ 3.81/04/180F SN SW (1792970000)
-
4x M4x8 securing screws for VESA100 mounting
1.6.
Installation
The installation of the system is described in this documentation.
For details regarding the integrated IPC see separate product documentation DOC/COMPACT71-SLE.
1.7.
Safety Recommendations and Warnings
The product is intended for measurement, control and communications applications in industrial environment. The products
must be installed by specially trained people. The strict observation of the installation guideline is mandatory.
The use of the product in systems in which life or health of persons is directly dependent (e.g. life support systems, patient
monitoring systems, etc.) is not allowed.
The use of the product in potentially explosive atmospheres requires additional external protection circuitry which is not
provided with the product.
Important note
Ensure that the power supply is disconnected from the device before working on the
device (connecting interfaces, replacing flash cards, batteries, opening the enclosure,
etc.).
Important note
The output voltage of the external power supply shall be SELV and shall be limited
power source according to clause 2.5 EN 60950-1.
Please read the safety instructions of the power supply before installing/connecting
the device.
In case of uncertainty or of believed errors in the documentation please immediately contact the manufacturer (address see
chapter 7). Do not use or install the product if you are in doubt. In any case of misuse of the product, the user is solely liable for
the consequences.
1.7.1.
EMC
Important note
This is a Class A product and not intended to be used in domestic environment. The
product may cause electromagnetic interference. Appropriate measures must be
taken.
