Digital Creasing Machine
- 9 -
4.5
Operation Example
First, after determining the indentation data according to actual needs, and press the
“New” button to create the indentation data;
Second, save the indentation data, or directly press the start button to start the
indentation operation, then the indentation data will be automatically saved to the first group;
Third, after the machine starts running, the prepared paper is fed into the machine one
by one to complete the indentation operation
Chapter 5 Related Settings
Machine related settings
Press and hold the “E” button to turn on the power switch, and the machine enters the background
detection and error correction mode:
Figure 6 Other settings information
As shown in Figure 6, as below
(1) 7.Language setting; switch between Chinese and English;
(2) 8.Operation parameter setting; Setting the value range 0-100; when the machine is
working in the lower grid voltage or low temperature environment, it is necessary to set the
value to be larger, and reduce the working efficiency of the machine to ensure it can work fine
in the special environment.
(3)
9.mm-inch;Centimeter-inch conversion
