Digital Creasing Machine
- 10 -
Chapter 6 Machine Detection and Error Correction
Press and hold the “E” button to turn on the power switch, and the machine enters the
background detection and error correction mode, as shown in Figure 7.
Figure 7 Detection and error correction
Follow the prompts to achieve the detection of each sensor and motor.
When it is found that the actual indentation is deviated from the input indentation data, it is
necessary to correct such deviation by adjusting the indentation accuracy. Different working
environments and different paper types need to be re-adjusted.
The specific steps are: use the “
∧
” and “
∨
” buttons to move the cursor to the indentation
precision adjustment, and press the (SET) button to enter.
(1)
Enter the “Indentation Accuracy Adjustment” interface, as shown in Figure8:
Figure 8 Indentation accuracy adjustment
(2)
Press the “START/STOP” button to start the machine and feed an A3 paper. The
machine will automatically press out two indentations and carefully measure the distance from
the starting edge to the two indentations of the paper. After the measured data is input, press
the “Save” button to save the data, the indentation precision adjustment is completed.
