Digital Creasing Machine
- 7 -
Chapter 4 Operation
4.1
Start-up
After the machine is properly installed, turn on the power switch on the right side of the
machine. After the machine is initialized, the following screen will be displayed, waiting for
your operation.
Figure 1 boot screen
4.2
Establishing indentation
data
The machine needs to input the indentation data before perform the indentation operation.
Press the button (SET) corresponding to the new screen to adjust the new indentation
interface.
Figure 2 New indentations
After entering, press the number buttons to input the indentation data, press the “C” button to clear,
press the “Enter” (E) button to confirm, the machine can be maximally set up to 16 indentations. After
the data input is completed, press the “Save” (SET) button to enter the indentation data save interface.
