Syscom Video Motorized Full-HD IR Bullet Network Camera Instruction Manual Download Page 7 | Manualshive

Page: 7 / 65

background image

1.2 Key Features

• Brilliant video quality

The Network Camera offers the highly efficient H.264 video compression, which drastically
reduces bandwidth and storage requirements without compromising image quality. Motion JPEG
is also supported for increased flexibility.

• Dual or triple streams

The Network Camera can deliver dual or triple video streams simultaneously at full frame rate in
all resolutions up to Full-HD(1920 x 1080p) using Motion JPEG and H.264 (or MPEG-4). This
means that several video streams can be configured with different compression formats,
resolutions and frame rates for different needs.

• Image setting adjustment

The Network Camera also enables users to adjust image settings such as contrast, brightness
and saturation to improve images before encoding takes place.

• Intelligent video capabilities

The Network Camera includes intelligent capabilities such as enhanced video motion detection.

• Easy Focus

Easy Focus will be activated once Day/Night mode switched, and the focus readjusted
automatically.

• Focus & Zoom Control via Network

The Network Camera also enables users to adjust focus and zoom remotely via network.

• Resolution
2

Megapixel, 30fps@1920x1080

• Micro-SD Recording support

The Network Camera also supports a micro-SD memory slot for local recording with removable

stor

age.

• Improved Security

The Network Camera logs all user access, and lists currently connected users. Also, its full frame
rate video can be provided over HTTPS.

• ONVIF

This is a global interface standard that makes it easier for end users, integrators, consultants,

and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility, reduced

cost, and future-proof systems.

7

«
...
5
6
7
8
9
...
»

Summary of Contents for Motorized Full-HD IR Bullet Network Camera


































































Reviews:

No comments

Related manuals for Motorized Full-HD IR Bullet Network Camera

Brand: L-Sniper Pages: 12

Brand: Hamron Pages: 34

Brand: IBS Pages: 24

Brand: Okina USA Pages: 2

Brand: 4xem Pages: 2

Brand: 4xem Pages: 64

Brand: Ecco Pages: 16

Brand: Olympus Pages: 76

Brand: Olympus Pages: 76

Brand: Olympus Pages: 30

Brand: Olympus Pages: 83

Brand: Olympus Pages: 2

Brand: Olympus Pages: 120

Brand: Olympus Pages: 132

Brand: Olympus Pages: 84

Brand: Olympus Pages: 84

Brand: Olympus Pages: 80

Brand: Olympus Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands