AE & AWB
•
Exposure control
This page provides access to the advanced exposure control settings for the network camera.
-
Mode:
Supports exposure modes to control the amount of light detected by the camera
sensor based on settings for light conditions. The default setting is Auto mode.
*
Automatic:
Automatically sets the amount of light detected by the image sensor.
*
Hold Current:
Fixes the exposure at its current state.
-
Value:
Select a value in the drop-down list to tune the exposure. The default setting is 5.
-
Flicker Mode
- Provides the options for flicker.
*
50Hz:
Select at 50 Hz environments.
*
60Hz:
Select at 60 Hz environments.
- Enable Long Exposure:
Set this checkbox to activate the electronic shutter of the camera.
*
Max. Shutter:
Select a shutter speed value in the drop-down list. The default setting is 1/15.
25
