Select the required Sample rate (number of times per second the sound is sampled). The
higher the sample rate, the better the audio quality and the greater the bandwidth required.
- Sound bitrate:
Depending on the selected encoding, set the desired audio quality (bitrate). The settings
affect the available bandwidth and the required audio quality.
• Audio Input
Audio from an external line source can be connected to the terminal I/O of the network camera.
-
Input volume:
If there are problems with the sound input being too low or high, it is possible to adjust the
input gain for the microphone attached to the network camera.
5) Date & Time
•
Current Server Time
It displays the current date and time (24h clock). The time can be displayed in 12h clock format
in the overlay (see below).
• New Server Time
Select your time zone from the drop-down list. If you want the server clock to automatically
adjust for daylight savings time, select the “Automatically adjustment for daylight saving time
changes”.
From the
Time Mode
section, select the preferred method to use for setting the time:
-
Synchronize with computer time:
sets the time from the clock on your computer.
-
Synchronize with NTP Server:
the network camera will obtain the time from an NTP
server every 60 minutes.
-
Set manually:
this option allows you to manually set the time and date.
21
