Syscom Video FASTRAX IV Instruction Manual Download Page 59

Page: 59 / 72

1. Select the desired Function by pushing Joystick up or down.

2. Select the number by twist the Joystick in PRESET, PATTERN, TOUR, and SCAN.

3. Press

CTRL or IRIS Open to execute.

Note : To execute the function, you should save the function (PRESET, PATTERN, TOUR,
and SCAN) first.

- HOME

Select the HOME menu and press CTRL key. Then dome camera goes to the default position to
which the dome camera returns after an assigned period of inactivity passes.
The default position may be a Preset, Tour, Pattern or no action.

- AUTO PAN
You can execute the endless auto pan which is to turn one direction continuously by select the
Auto Pan.

- RELAY OUT
This function can operate only when the relay output setup has the time in the alarm menu.

You can select OUT1, 2, 3, 4 and press CTRL or IRIS Open then that relay operates during the
setting time only.

Summary of Contents for FASTRAX IV









































































Search results

Summary of Contents for FASTRAX IV

Reviews:

Related manuals for FASTRAX IV

Brands by name

Popular brands

Syscom Video FASTRAX IV, Instruction Manual

Search results

Summary of Contents for FASTRAX IV

Reviews:

Related manuals for FASTRAX IV

Brands by name

Popular brands