Syscom Video FASTRAX IV Instruction Manual Download Page 45

Page: 45 / 72

If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off
the NIGHT SHOT mode and “888” + ENTER will turn On the NIGHT
SHOT mode

B/W mode.

OFF

Color mode.

START TIME

Set time to change from “Color mode” to “B/W mode”

END TIME

Set time to change from “B/W” to “Color mode

NOTE: Values in ( ) are for PAL Camera. The WDR operates in AE1 mode only.
NOTE: When BACKLIGHT set BLC or HLC, focus issues may occur in certain lighting

conditions.

NOTE: AUTO in NIGHT SHOT function is not applied in "MANUAL" mode of AE Control.

3.12.4 DIS (Digital Image Stabilization)

DIS USE

ON / OFF

Choose to enable or disable DIS

IMAGE SHOW

NONE / PIP / PDP

NONE

Only viewing DIS Active image.

PIP

View original image (small) and DIS active image (big) as picture in

picture.

PBP

View original image (left) and DIS active image (right) as picture in

picture.

Note : There might be malfunction of DIS for the following cases.

- The camera is operating under extremely low light condition.

- The object brightness is almost identical to the background luminance

- The object is moving very fast

-. The camera is unsteady due to improper installation

Summary of Contents for FASTRAX IV









































































Search results

Summary of Contents for FASTRAX IV

Reviews:

Related manuals for FASTRAX IV

Brands by name

Popular brands

Syscom Video FASTRAX IV, Instruction Manual

Search results

Summary of Contents for FASTRAX IV

Reviews:

Related manuals for FASTRAX IV

Brands by name

Popular brands