Stratabox 3510 Firmware Flash update instructions
It is recommended you print these for reference while completing your firmware update.
1. Uninstall the old versions of Stratabox software.
2. Install the new version of Stratabox software provided.
3. Connect the Stratabox 3510 with power applied to the Stratabox with data cable to the com port
you assigned and connect the data cable to the 10kHz data cable connector.
4. Using Windows Explorer go to the C:\Program Files\SyQwest\StrataBox\Firmware\10kHz
directory and copy the StrataFW.hex file and place it in the Stratabox directory.
5. Then Turn on your Stratabox 3510 power switch to the 10kHz position the software will then
prompt you. New firmware detected do you wish to proceed with the update? Click the yes button
and it will update the flash memory device on the DSP.
6. When the update is completed cycle power on the Stratabox 3510 and you should see a flashing
green light.
7. Turn on the Stratabox software and click Help About and it should say Firmware 48 Software
3.0.8.0.
8. Connect the Stratabox 3510 with power applied to the Stratabox with data cable to the com port
you assigned and connect the data cable to the 3.5kHz data cable connector.
9. Using Windows Explorer go to the C:\Program Files\SyQwest\StrataBox\Firmware\3.5kHz
directory and copy the StrataFW.hex file and place it in the Stratabox directory.
10. Then Turn on your Stratabox 3510 power switch to the 3.5kHz position the software will then
prompt you. New firmware detected do you wish to proceed with the update? Click the yes button
and it will update the flash memory device on the DSP.
11. When the update is completed cycle power on the Stratabox 3510 and you should see a flashing
green light.
12. Turn on the Stratabox software and click Help About and it should say Firmware 48 Software
3.0.8.0.
