Synway Syn_PBX100 U100, User Manual, Page: 48 / 132

Copyright ©Synway All Rights Reserved47 / 132 V2.1.2
3.3.7 Inbound Routes
General
For both FXO channels and VoIP channels, you can define default inbound destinations. If you
don’t want the inbound calls to always go to an IVR menu, ring group or extension, then you can
use a time rule to handle the inbound calls.
Port DIDs
If some of the FXO/GSM/WCDMA ports are dedicated to a specific calling service and you want
them handling differently to your generic service then you can configure “
Port DIDs ” here.
For the above example, all inbound calls from FXO port 1 will be directed to extension number
401. General inbound control will still work with other ports which have not been configured
with port DIDs.
Number DIDs
Number DID is for inbound control of VoIP/E1/T1/BRItrunks but not FXO/GSM/WCDMAtrunks.
Your service provider will issue you with one or a number of DID numbers with which people can
call you on.
Click “
Number DIDs ” tab and click “ New Number DID ” button to add a number DID rule:
In this example, if the caller calls your DID number 51097214 the call will go directly to extension