Copyright ©Synway All Rights Reserved117 / 132
V2.1.2
8.System Advanced
8.1 Time Settings
System time is very important for the SYN_PBX system, especially if theSyn_PBX system handles
inbound phone calls using time rules, then only if the system time is correct will calls be handled
properly. Also, call logs and debug logs recorded to the system events use system time.
Syn_PBX system supports NTP(Network Time Protocol) and manual time set.
8.1.1 NTP
Navigate to web menu
System->Time Settings
.
By default,Syn_PBX system use NTP to obtain time from Internet time servers. To configure,
simply inform the SYN_PBX system where to find the server by specifying its domain or IP address.
Also, please remember to select the correct time zone.
Once complete, click “
Sync
” button and the SYN_PBX system will attempt to synchronize the
current time from the Internet. It might take a while depending on your network conditions.
After the process is complete, you’ll receive a notice saying either “Sync Failed!” or “Sync
Success!”. If failed, then please check if the SYN_PBX can access the Internet or please change to
another NTP server and try again.
8.1.2 Manual Time Set
If you want to manually set the time for the SYN_PBX system or for some special reason the
Summary of Contents for Syn_PBX100 U100
Page 1: ......