Synway Syn_PBX100 U100, User Manual, Page: 102 / 132

Copyright ©Synway All Rights Reserved101 / 132 V2.1.2

Enable : Enable TR069 service

CPE to ACS URL : Input URL to visit ACS, which is used by PBX to connect ACS via CPE WAN
management protocol (CWMP)

ACS Authentication Mode : Select ACS Authentication Mode: NONE/ BASIC/ DIGEST

ACS Username : When the PBX sends a request to ACS, ACS will provide username to the
authorized PBX.

ACS Password : When the PBX sends a request to ACS, ACS will provide password to the
authorized PBX.

CPE Inform Interval (sec) : Interval for CPE to connect ACS.

ACS to CPE URL : Input URL to visit CPE. Format: http://IP:port(7547).
5.8 Troubleshooting
We have included two tools for troubleshooting network problems and they allow you to check
the network reachability, ping and traceroute. With these tools you'll get an outside view of your
network response time and network topology, which allows you to track down possible errors
more easily.
5.8.1 Ping
The ping command is a very common method for troubleshooting the accessibility of devices. It
uses a series of Internet Control Message Protocol (ICMP) Echo messages to determine:
 Whether a remote host is active or inactive.

The round-trip delay in communicating with the host.

Packet loss.