Synway Information Engineering Co., Ltd
SMG-B Series Analog Gateway User Manual (Version 1.1.0)
Page 18
Ringing
The channel is in the ringing state.
Talking
The channel is in a conversation.
Dialing
The channel is dialing.
Pending
The channel is in the pending state.
Internal State
Internal state of the channel.
Unusable
The channel is unavailable.
Direction
Displays the direction of the call on channel.
CallerID
Displays the CallerID of the call on channel.
CalleeID
Displays the CalleeID of the call on channel.
Reg Status
Displays the registration status of the port.
Polarity Reversal
Count
The counts of the polarity reversal detected by the FXO port.
3.2.3 Call Count
Figure 3-7 Call Count Interface
See Figure 3-7 for the call count Interface. The above list shows the detailed information about all
the calls counted from the startup of the gateway service to the latest open or refresh of this
interface. You can click
Refresh
to obtain the current call count information. The table below
explains the items shown in Figure 3-7.
Item
Description
Call Direction
A condition for call count, two options available:
IP
Æ
Tel
and
Tel
Æ
IP
.
Total Calls
Total number of calls in a specified call direction.
Successful Calls
Total number of successful calls in conversation.
Busy
Total number of calls which fail as the called party has been occupied and replies a
busy message.
No Answer
Total number of calls which fail as the called party does not pick up the call in a long
time or the calling party hangs up the call before the called party picks it up.
Call Forward
Total number of calls which have been forwarded.
Routing Failure
Total number of calls which fail because no routing rules are matched.
Dialing Failure
Total number of calls which fail as the called party number does not conform to the
dialing rule or due to dialing timeout.
Unknown Failure
Total number of calls which fail due to unknown reasons.
