Synway Information Engineering Co., Ltd
SMG-B Series Analog Gateway User Manual (Version 1.1.0)
Page 6
Figure 1-7 SMG1016B4-16S Rear View
Figure 1-8 SMG1016B4-16S Left View
The table below gives a detailed introduction to the interfaces, buttons and LEDs illustrated
above:
Interface
Description
Amount: 1
Type: RJ-45
Bandwidth: 10/100 Mbps
Self-Adaptive Bandwidth Supported
Auto MDI/MDIX Supported
LAN
Built-in Link indicator and ACTIVE indicator. For more details, refer to
1.4 Indicator
Info
Amount: Depends on the model of SMG-B analog gateway
Type: RJ-11, RJ-45
Maximum Transmission Distance: 5000m
FXS
Charge Mode: Negative Anti-billing Supported
Amount: 1
Type: RS-232
Baud Rate: 115200bps
Connector: RJ45 to DB-9 Connector
Data Bits: 8 bits
Stop Bit: 1 bit
Parity Unsupported
Console Port
Flow Control Unsupported
External Power Supply
Interface
Provide the 12V voltage with positive inside and negative outside, and the current
is larger than 3A
Button
Description
Reset Button
Restore the gateway to factory settings by pressing this button persistently for 3
seconds
LED
Description
Power Indicator
Indicates the power state. It lights up when the gateway starts up with the power
Ventilation Holes
Screw Holes for Foot Bracket
Ethernet
RJ45 Interface
Grounding Stun
220V AC Power Key
