Mode 2: Arpeggiator
The arpeggiator lets you play predefined arpeggios or set your own arpeggio notes with MIDI.
start/stop
: Start and stop the arpeggiator
pattern
: Cycle through the arpeggio patterns UP, DOWN, UPDOWN, RANDOM
chord/MIDI
: Cycle through four 4note arpeggio chords major, minor, M7, m7. If you have a
MIDI controller connected, played MIDI note sets the root note of the arpeggio. The 5th
“chord” is MIDI input mode. In this mode, the arpeggiator creates an arpeggio from the notes
you play on the controller. It does not matter which MIDI channel is used.
transpose
: Transpose the current arpeggio up or down
BPM
: Set arpeggiator speed in the range of 20 to 300 beats per minute. (If MIDI clock pulses
are being received by the device, this control will have no effect.)
time division
: Change the note length relative to the rate in BPM. Cycle through values
quarter notes, eighth notes, sixteenth notes, 32nd notes. The default is sixteenth notes.
note length
: Change length of each note in arpeggio. This allows you to have very short
staccato notes or long notes with no break between them.
