Troubleshooting Guide
I don’t hear any sound.
Check the volume thumbwheel on the right side. Turn it clockwise (toward you) to increase volume.
Check to see that the filter cutoff frequency is not set to zero.
Ensure that your MIDI controller is sending on the right channel.
If using the groovebox sequencer, make sure the track volume is not set to zero on the current
track.
The waveform and envelope controls are not changing the sound I’m playing on my
controller.
The voice select pot controls which voice the controls affect. Turn the voice select pot to choose
voice 14 as indicated by the LEDs. Ensure that your MIDI controller is sending on the channel that
corresponds to the selected voice.
The filter LFO does not have much effect.
The filter LFO modulates around the current cutoff setting. If this is set too high or too low, you will
not hear much modulation. Adjust the filter cutoff.
If you cannot solve your problem by reading this manual or in the support forum on synthino.com,
please email