Updating the Synthino XM Firmware
Windows PC
For driver navigate to Flip Folder.
Mac OS X
It contains a folder dfuprogrammer0.6.2 which contains the command line utility
dfuprogrammer
.
To upload a firmware hex file (e.g. ‘synthino_xm.hex’) to the Synthino XM device, perform this
procedure. Hold down button 3 then connect USB between your Mac and the Synthino XM.
You may now release button 3. The Synthino XM is in programming mode and is waiting for
new firmware from your Mac. Run this command from the Terminal application on your Mac:
dfuprogrammer atxmega128a4u flash
erase
first synthino_xm.hex
After a few seconds you should see a response like this:
Validating...
117148 bytes used (89.38%)
Now disconnect and reconnect power to the Synthino XM. It will now be running the new
firmware.
Manual version v1.0
© 2015 Michael Krumpus
“Synthino” and “Synthino XM” are trademarks of nootropic design, LLC.