FINAL TIGHTENING
Equipment
2997-04-220
Key Inserter/Tightener
2997-04-230
X25 Inserter/Tightener
2997-04-320
Torque Limiting Handle
2997-04-255
Counter Torque Handle
2997-04-205
Facilitator
Alternative Equipment
2997-04-325
Torque Handle Adapter, 10mm Hex
2770-40-510
Torque Wrench Handle
Caution: When using Correction Keys, final tightening of
the Poly Lock must always be completed prior to
tightening of the Rod Lock. Failure to do so could result in
the threads of the Correction Keys not being fully engaged
with pedicle screw head and the Correction Keys
remaining proud. When final tightening, revisit set screws
at every level, starting with the outer portion of the
Correction Key working away from the levels which have
been reduced the furthest. After revisiting the outer
portion, perform the same action on the inner portion of
all set screws at every level.
Final tightening of the Poly Lock is performed with the Key
Inserter/Tightener attached to the Torque Limiting Handle.
Final tightening of the Rod Lock is performed with the X25
Inserter/Tightener attached to the Torque Limiting Handle.
Final tightening torque for the system is 80in-lb (9Nm).
FIGURE 59
DePuy Synthes Companies
|
EXPEDIUM VERSE System
|
System Guide
32
Summary of Contents for EXPEDIUM VERSE
Page 1: ...SYSTEM GUIDE EXPEDIUM VERSE Spinal System...
Page 2: ......
