14
13
Insert first locking screw
Insert the locking screw through the Protection Sleeve
11.0/8.0 using the Hexagonal Screwdriver (314.750) and
make sure the screw head is in contact with the medial
cortex. The locking screw should surpass the medial cortex by
at least 2 mm, but not more than 4 mm.
14
Insert second locking screw
Repeat steps 11 to 13 for inserting the second locking screw
in the caudal screw hole on the aiming arm.
Note:
For standard locking use two locking screws whenever
possible.
